Electromechanical Engineering & Systems Fabrication
Portable Ramp Soak Pressure Test Tank
C&M designed and fabricated a small portable pressure vessel to perform hydrostatic pressure testing of "various explosive devices" at pressures to 300 pisg for the Naval Surface Wepons Center in Crane, IN. The vessel was designed and tested in accordance with the ASME Pressure Vessel Code. A counter weighted locking ring cover permits ease of access. After a test item is loaded and the tank is filled with water, it is pressurized with dry nitrogen. Through use of a PID loop controller and an accurate, tank mounted pressure transducer, pressure ramp rates of between 10 psi per min. and 300 psi per min. can be selected.

Electromechanical Engineering & Systems Fabrication | Home | Company Profile
Request More Information | Site Directory

475 Bridge Street, Suite 100, Groton, CT 06340Tel: 860-448-3253 x101• Fax: 860-448-3075email: ccorrado@aphysci.com